Description
Suzuki 800BSG
Engine: 805 cm3 V
Number of cylinders: 2
Power: 56. 7. 5 HP, at 5870 rpm (dynamometer test)
Torque: 78 Nm, at 4434 rpm (dynamometer test)
Frame: VS51A102330
Year of production: 1990
Tank capacity – 14 liters
Power supply: 2x Mikuni carburetors
Gearbox: 5 steps
Cooling: liquid
Weight - 220 kg
VIN: VS51A102330
Motorcycle registered in Poland
Technical inspection valid until: April 2025
Third party liability insurance valid until: August 2024
- New paint
- New stickers
- New oil filter
- New engine oil
- New DOT4 brake and clutch fluid
- New gear oil
- New wheel bearings
- New Barracuda shifters
- New coolant
- New powder coating of structural elements
- New engine paint
- New galvanic coating of fasteners
- New upholstery
- New clutch
- New suspension oil
- New suspension seals
- New collector gaskets
- New head tube bearings
- New mirrors
- New air filters
- New tires
- New candles
- New wheel valves
- New stainless steel spokes
- New brass spoke nipples
- New steering wheel
- New clock frames
- New clock lenses
- New ignition switch
- New automatic brake at the front
- New front fender
- New front discs
- New set of water pump seals
- New speedometer cable
- New screws/ washers/ nuts
- New fuel lines
- New rear suspension seals
- Accessory BiTubo rear suspension
- Accessory side inlets for the BSG tank
- BSG accessory rear end
- Accessory BSG sofa
- Accessory fuel filler
- Accessory Brembo door handles
- Accessory aluminum wheels
- Accessory LED rear lamp
- Accessory LED turn signals
- Accessory BSG clock faces
- Accessory Brembo hydraulic pumps
- Accessory controls
After modifications, the motorcycle underwent full renovation and inspection of elements that did not require replacement with new ones:
* The motorcycle was tested on a dynamometer under full load and throughout the entire rev range
* Wheels: Centered and balanced (dynamically)
* Brake calipers assembled with ATE assembly pastes
* Charging +14v
* Electrics after inspection: front and rear lights with registration light/ turn signals/ horn/ fuel pump/ neutral gear sensor, brake light sensors/ voltage regulator/ charging, indicator lights, clock backlight
Additional information:
* Marzocchi front suspension
* BiTubo rear suspension
* Grimec brake calipers
* Plastic fuel tank (no corrosion problem)
* Fuel tank lifted on a hinge (like a hood in a car)
* A soft sofa made of two layers of sponges of different hardness
* Steel braid of hydraulic lines
* Hella headlamp with glass cover
* Single-seater motorcycle
_
A test ride of a motorcycle is possible only after leaving a deposit of 100% of the amount included in the offer. If this condition is not met, the motorcycle can only be viewed.* The colors of the motorcycle are dominated by black and gold accents + the tank core was painted by us in dark green and then covered with black clear. Thanks to this procedure, the motorcycle is completely dark, while only in full sunlight does the dark green emerge from the depths.